KP-860
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-860 (with operating display light)
Type : Conveyor peripherals switch
Application : Conveyor emergency-stop device with reliable operation. Two-direction operating system.
Action : Manual-reset
|
Indication : Indication lamp (Red)
Power source : 100, 200VAC or 24VDC
Output contact: SPDT x 2
Output capacity : AC250V, 10A
Process connection : 2-φ10
Pich 110
Enclosure rating : IP-67
|
|
KP-870
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-870 (with operating display board)
Type : Conveyor peripherals switch
Application : Conveyor emergency-stop device with reliable operation. Two-direction operating system.
Action : Manual-reset
|
Indication : Indication plate (Red)
Power source : No
Output contact: SPDT x 2
Output capacity : AC250V, 10A
Process connection : 2-φ10
Pich 110
Enclosure rating : IP-67
|
|
KP-880
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-880
Type : Conveyor-belt alarm switch
Application : To detect operational exception such as belt moving-off-to-one-side or meandering and protect the belt from break and prevent the conveyor line from any mechnical problem
|
Action : Auto-recovery
Power source : No
Output contact: SPDT x 2
Output capacity : AC250V, 10A
Process connection : 2-φ10
Pich 110
Enclosure rating : IP-67
|
|
KP-4
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-4 (wall-mounted type)
Type : Flow switch/sensor
Application : To specially use for flow detection on conveyor
Power source : No need
|
Output contact: SPDT x 1
Output capacity : AC250V 10A, DC30V 10A
Contact operating angle : About 5°
Process connection : 4xφ7 hole
Enclosure rating : IP-43
|
|
KP-810
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-810 (for lump type)
Type : Flow switch/sensor
Application : To use for lump flow detection/ upper limit detection
Power source : No need
|
Output contact: SPDT x 2
Output capacity : AC250V 10A, DC30V 10A
Contact operating angle : About 10°, 15°
Process connection : 4xφ12 hole
Enclosure rating : IP-X3
|
|
KP-820
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-820 (Small-gravity type)
Type : Flow switch/sensor
Application : To use for flow detection on conveyor
Power source : No need
|
Output contact: SPDT x 1
Output capacity : AC250V 5A, DC30V 5A
Contact operating angle : About 15°
Process connection : 6xø7 hole
Enclosure rating : IP-43
|
|
KPG-840
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-840 (Flame & explosion proof)
Type : Flow switch/sensor
Application : To use for harzardous areas where flammable dust due to coal and so on comes into being or flammable gas exists.
|
Power source : No need
Output contact: SPDT x 1
Output capacity : AC250V 5A, DC30V 5A
Contact operating angle : About 15°
Process connection : JIS 5K 65A
Enclosure rating : IP-67
|
|
KP-830
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KP-830
Type : Flow switch/sensor
Application : To use for flow detection of falliing objects in tilted chute
|
Power source : No need
Output contact: SPDT x 1
Output capacity : AC250V 5A
Operating angle : About 25°
Process connection : JIS 5K 65A
Enclosure rating : IP-55
|
|
KPS-11
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KPS-11 (Photo sensor)
Type : Speed detector
Application : To use for catching changes of conveyor speed by directly connected to shaft.Reliably monitoring rotating speed.
Power source : 105/220VAC ±10% 50/60Hz
Power consumption : 2.5VA
|
Output contact : SPDT
Output capacity : 250VAC 5A, 30VDC 5A
Allowable speed : Below 2000rpm
Setup range : 3-1999rpm
Measurement error : 2rpm
Start-up compensation time : 0 to 99 seconds
Temperature : -10°C ~60°C (no compensation)
Enclosure rating : IP-54 or equivalent
|
|
KPS-21
|
|
Brand : Kansai
Media : Powder, granules , lump
Model : KPS-21 (Proximity sensor)
Type : Speed detector
Application : To use for catching changes of conveyor speed by non-contact type, easy to handle.Reliably monitoring rotating speed.
Power source : 105/220VAC ±10% 50/60Hz
Power consumption : 2.5VA
|
Output contact : SPDT
Output capacity : 250VAC 5A, 30VDC 5A
Allowable speed : Below 2000rpm
Setup range : 3-1999rpm
Measurement error : 2rpm
Start-up compensation time : 0 to 99 seconds
Temperature : -10°C ~60°C (no compensation)
Enclosure rating : IP-54 or equivalent
|
|
